Repeater icom Controller for ID-RP D/V.Original.

Repeater Controller for ID-RP D/V.

ID-RP 2C 
Repeater Controller
Handles up to four RF modules.

D-STAR is an open protocol developed by the Japanese government and by the J. A. R. L. Icom is currently the only company manufacturing D-STAR-compatible radios. D-STAR radios can talk directly to each other without any intermediate equipment, or through a repeater using D-STAR voice or data transceivers.

The D-STAR system supports two types of digital data streams:

The Digital Voice (DV) stream used on 144 and 440 MHz which contains both digitized voice (3600 bps including error correction) and digital data (1200 bps). Using a DV radio is like having both a packet link and FM voice operating simultaneously.

The Digital Data (DD) stream, used only on 1.2 GHz, is entirely data with a bit rate of 128k bps. The data connection to a radio that uses DV is via an RS-232 interface or USB 1.0. An Ethernet connection is used for high-speed DD D-STAR data.

Brand:ICOM
Manufacturer’s Part Number:ID-RP4000V
Part Type:Repeaters and System Components
Product Line:ICOM D-Star DV Mode RF Repeater Modules
DXE Part Number:ICO-ID-RP4000V

UPC: 0731797008688
Repeater Type: Digital Voice
Repeater Mode: FM (F1D )
D-Star Compatible: Yes
DC Supply Voltage: 13.8 Vdc
DC Supply Current: 7 A
External Microphone Connectors: No
Antenna Connector: Type N, female
Quantity: Sold individually.
Notes: 70 cm D-STAR Digital Voice Repeater.
ICOM’s D-STAR Digital Voice Repeater Modules support handheld, mobile, and base station equipment that utilizes the D-STAR digital voice (DV) protocol. Developed by ICOM in concert with the Japan Amateur Radio League (JARL), D-STAR is the first digital standard to gain amateur radio industry support.

Available for the 2 Meter, 70 cm, and 23 cm bands, these rack-mounted digital repeaters use QPSK modulation to repeat input signals in less than 5.5 kHz of bandwidth. Such a narrow bandwidth makes D-STAR very spectrally efficient! Transmitter power is selectable between a low of 2-3 watts and a high range of 23-30 watts. That’s plenty of power to put your repeater site on the map!

These D-STAR Digital Voice Repeaters sport Double-Conversion Super-heterodyne receivers for great sensitivity and selectivity. Utilizing Forward Error Correction, they have a very tolerant bit error rate, nearly to the noise floor, and they typically have less than .45 microvolt sensitivity!

These DV repeaters also support low-speed data trans