GW Instek APS1102A Programmable AC/DC Power Source

# Perhatian…!!! Keterangan spesifikasi lengkap bisa dilihat digambar #
============================================================
GW Instek APS-1102A 1kVA Programmable AC/DC Power Source
============================================================
Features
•    5.7″ Large LCD Display
•    Output Capacity: 1kVA(for AC 200V Input)
•    Output Modes: AC and AC+DC Combined with any of four signal sources
•    Signal Source: Internal(INT),External(EXT),Internal+External(ADD) and Synchronization(SYNC)
•    Arbitrary Waveform Power Output
•    Power Amplifier of External Signal
•    Measurement Functions: Voltage, Current, Power ,Frequency, Power Factor,CF,and Harmonic Current
•    Capacitor Input Load Supported
•    Sequence Function Allows Programming of Output Patterns
•    Limiter Function ( Upper / Lower / Limit Function)
•    30 sets of Save / Recall Memory
•    Output On / Off Switch
•    USB(USBTMC)and RS-232 Standard for Remote Control
•    PC Software (Including Data Logging)
============================================================
Specifications
MAXIMUM OUTPUT CAPACITY
-AC Input (100 – 180V) : 750VA
-AC Input (180 – 250V) : 1000VA
-DC Input (100 – 180V) : 750W
-DC Input (180 – 250V) : 1000W
OUTPUT VOLTAGE
-AC 100V : 0 – 155Vrms
-AC 200V : 0 – 310Vrms
-DC 100V : -220 – +220V
-DC 200V : -44 – +440V
OUTPUT MAX. CURRENT
-AC 100V : 10A
-AC 200V : 5A
-DC 100V : 10A
-DC 200V : 5A
OUTPUT MAXIMUM PEAK CURRENTS
-100V : 40Apk
-200V : 20Apk
FREQUENCY
-Setting Range : 1Hz – 550Hz
-Setting Accuracy : ±0.01% of set (1Hz – 550Hz, 23±5°C)
WAVEFORM
-SINE WAVE, SQUARE WAVE, ARBITRARY WAVE (Up To 16 Types Can Be Saved) : When signal source mode is INT and ADD mode only
-Output Voltage Distortion Rate : 0.5% MA1iI{SOHafEOHa}, iS0‘i‘i3 or higher of the rated output voltage, the maximum current or lower; THD+N
LINE VOLTAGE REGULATION
-0.2% MAXIMUM : Power input voltage iaov,r1 2011;’13 0111 no load ,rated output
LOAD VOLTAGE REGULATION
-0.5% MAXIMUM : At output terminal under np load and rayed resistance load
OUTPUT MODE : AC – INT Mode AC – EXT Mode, AC + DC – INT Mode AC + DC – EXT Mode, AC – ADD Mode AC – SYNC Mode, AC + DC – ADD Mode AC + DC – SYNC Mode
MEMORY : Save/Recall 30 sets
INTERFACE : USB(USBTMC) & RS-232 Standard
POWER SOURCE : AC 100V – 230V ±10%; 50Hz/60Hz ±2Hz (Single Phase)
DIMENSIONS & WEIGHT : 258(W) x 176(H) x 440(D), Approx. 9.7kg
ACCESSORIES : User Manual x 1, Power Cord x 2, (15A/125V 2m for Japan) (10A/250V 1.5 without plug for Japan, North America and Europe only), CD-ROM (Remote Control Software) x 1
===========================================================
UNTUK MENGHINDARI PESANAN BARANG ANDA DITOLAK OLEH KAMI, SILAHKAN BERTANYA STOCK BARANG TERLEBIH DAHULU. TERIMA KASIH
Untuk informasi dan pemesanan, silahkan menghubungi :
Telp. & WA : 62.813.3117.0440
Mail : [email protected]
============================================================